Checkpoint Charlie sign "You are leaving the American sector / Вы выезжаете из американского сектора / Vous sortez du secteur Américain / Sie verlasen den amerikanischen Sektor / US Army".

In case you needed a traced vector image of the iconic Berlin Wall sign in SVG format.

Finished CO2 sensor in 3D-printed case with USB cable

It’s getting ridiculously easy to make sensors for your smart home these days. I’ve built a carbon dioxide sensor using Senseair S8 LP (bought here) and ESP8266 NodeMCU board with native Home Assistant integration using ESPHome framework. Here are the steps:

Read more

So I got a TV with an intention of connecting it to the Kodi-based LibreELEC distro running on Raspberry Pi 4. The TV is of course a smart one because the market.

But things didn’t go that smoothly: LibreELEC is currently having some issues with 4k playback on RPi4 so I decided to wait and use the TV’s smart features instead.

The TV is running Samsung’s Tizen and can play DLNA/UPnP content e. g. from ReadyMedia server which is easy to set up. The problem was that the TV was randomly disconnecting with the “cable not connected” message. The playback progress was naturally lost. Infuriating.

Read more

Recently I’ve put together a simple e-paper (a.k.a. e-ink) display which shows current time and temperature. Why e-paper? Unlike LCD it provides better contrast at any angle and unlike TFT it doesn’t require backlight. The only downside is long screen refresh time (~4 s in my case).

The idea was to get current time from an NTP server and temperatures from Home Assistant instance which in turn gets them from wireless sensors.

Read more

Li-ion batteries don’t like being fully charged. They will retain capacity significantly longer if you charge them up to 80% or less. Check this plot from Battery University:

If you usually use up all of your laptop battery during the day, gradual battery degradation is something you’ll have to live with. However, if you mostly work with AC charger plugged in, you can set lower limit to your battery charge and prolong its life.

Read more

Lenovo ThinkPad T460s laptop has a built-in fingerprint reader, but unfortunately until recently there was no way to make it work. You know the story: the manufacturer (Validity, later bought by Synaptic) refuses to release the documentation and says they may release proprietary Linux driver someday. Thankfully, Nikita Mikhailov started reverse engineering these sensors and that work has been adapted by Marco Trevisan to create a functional fprint driver for 2016 ThinkPads (including T460s).
The procedure to make it work is not very straightforward, so I’ve decided to document it here for posterity.

Read more

I used to use web services such as OpenWeatherMap to monitor outside temperature in openHAB. I found out that sometimes they’re not very accurate and naturally they fail when the internet is down. So I decided to measure the temperature myself. After some searching, I decided to settle with battery powered ESP8266 wireless solution. The advantages are the following:

  • no wires;
  • low cost;
  • easy programming via familiar Arduino IDE;
  • long battery operation with deep sleep mode.
Read more

Disclaimer: I’m not an expert in networking, so the instructions below may be flawed. Be warned and proceed with caution! Corrections are highly welcome.

DNS leaks are nasty. ISPs may tamper with DNS for purposes of censorship or eavesdropping. Luckily, there are public DNS servers, e. g. Google (8.8.8.8), Cisco OpenDNS (208.67.222.222) and Quad9 (9.9.9.10) which may behave better.

I’ve set up my router to use public DNS servers instead of provider’s. In LEDE (OpenWrt) router firmware this can be done in GUI: go to Network → Interfaces → WAN → Edit → Advanced Settings, uncheck ‘Use DNS servers advertised by peer’ and add custom server IPs below.

The trouble is that LEDE runs its own DNS server and advertises its address (e. g. 192.168.0.1) to clients via DHCP. When NetworkManager connects to OpenVPN it keeps this address as one of DNS resolvers (even if you add push "dhcp-option DNS 9.9.9.10" to OpenVPN server config). You can check it with

cat /etc/resolv.conf

# Generated by NetworkManager
nameserver 9.9.9.10
nameserver 208.67.222.222
nameserver 192.168.0.1

This way, DNS requests may occasionally be sent to the router which forwards them to configured servers skipping VPN tunnel and making them visible to the ISP (unless you’ve set up DNSCrypt, of course).

Read more

I’ve upgraded my Manjaro kernel from 4.9.65 to 4.14.2 today and suddenly my bluetooth mouse stopped working. The adapter is Intel Wireless 8260 on Lenovo T460s laptop. After some searching I stumbled upon this kernel bug, but fiddling with firmware didn’t seem like an exciting prospect.
Thankfully, I’ve found solution in this thread on Manjaro Forums. Seems like the bug is there at least since kernel 4.13.2:
sudo nano /etc/modprobe.d/iwlwifi.conf

options iwlwifi bt_coex_active=0

After reboot the mouse is working fine with Wi-Fi turned on, audio receiver is yet to be tested.
UPD: bluetooth audio receiver is working fine too.

Here’s a little Greasemonkey script which changes the default font on Startpage.com and Ixquick.eu. The default one (Arimo) lacks Cyrillic glyphs so I changed it to default “Sans Serif” which is mapped to Cantarell on the screenshot.
 Startpage_Font.user.js

For those who don’t know, these search engines claim to respect user privacy. Startpage displays results from Google Search but doesn’t relay or store your IP address or cookies.